NDK Co.,Ltd.

  • ABOUT
  • COMPANY
  • GALLERY
JP

NDK Co.,Ltd.

「愛知県岡崎市から世界へ」

Thank you very much for visiting our website.
NDK Co., Ltd. is a newly established company that has inherited the business of the long-standing Nishioka Electric Works.
We would like to express our sincere gratitude to all those who have supported Nishioka Electric Works over the years.
Moving forward, we will carry on the trust and achievements built by our predecessors, and with a renewed spirit, our entire team will work together to create new value.
We kindly ask for your continued guidance and support in the future as well. CEO Toshikazu Kaneko

Automatic control design & Construction

We provide total support for plant-related wiring work, as well as system design, fabrication, wiring work, and adjustment in promoting automation and manpower saving in factories using sequences.

Rexroth Bosch Group

Line construction using aluminum frames with rich functionality.

We started out as a wiring contractor and now provide total support for electrical systems and equipment.
As we struggled with the eternal themes of "cost reduction" and "quick delivery," we came across BOSCH's aluminum and wondered if we could make use of its convenience. We believe that our easily reassembled and reusable frames can demonstrate their merits in the manufacture of a wide variety of products and in the construction of production lines where changes in functionality are required due to improvements.

Planning

Identification of problems, suggestions for improvement, etc.
Identifies problems related to equipment and systems in the factory and proposes improvements, etc.
Proposal of basic concept
We derive a basic concept for the solution of each problem, areas for improvement, etc.
Specification meeting
Based on the basic concept, we determine specifications that meet the end user's needs and create a process chart.
Design
We create hardware drawings in accordance with end-user specifications for control and operation panels, etc., and design software and draw touch panels.

Construction

Production
We manufacture control panels, operation panels, etc. based on various hardware drawings. We also perform careful shipping inspections, including electrical power checks.
Construction work
The site supervisor prepares construction drawings and process schedules, and performs electrical wiring work for various types of equipment by ensuring safety management on site.

Performance

Commissioning and Adjustment
In order to reduce the number of man-hours required for on-site adjustments, in-house debugging is performed before on-site adjustments are made.
Briefing session
We will conduct a handling briefing session so that the end-user can understand. We will also submit the final completed documents.
Follow-up service
Of course, we will also take every possible measure to ensure that the project is handled after completion.

技術力、起動力、社員力

OUR BUSINESS

  • STEP.01

    Having costomer's request and meeting

  • STEP.02

    Drawing of layout based on the meeting

  • STEP.03

    Making a set of figures

  • STEP.04

    Manufacturing the parts at our factory

    Pack each part properly for smooth operation.

  • STEP.05

    Assembly

  • STEP.06

    Instalation of the machines

  • STEP.07

    Instalation of the robots

  • STEP.08

    Manufacturing the control panel

  • STEP.09

    Wiring works at the site

    Fast and clean JAPAN quality

  • STEP.10

    Robot teaching

    Professional robot teaching personnel handle a variety of robots

  • STEP.11

    Adjustment of a trial operation

    We take pride in our work and tailor it to our clients' needs.

  • STEP.12

    How-to briefing at the site

  • STEP.13

    Production

    COMPANY

    Company name NDK Co.,Ltd.
    Representative CEO Toshikazu Kaneko
    Head office ZIP/Postal code 444-0241
    29 Kami-ike, Akashibu-cho, Okazaki-shi, Aichi, Japan9
    TEL: 0564-64-3412
    FAX: 0564-64-3866
    Okazaki Factory ZIP/Postal code 444-2135
    1-5-6 Daimon, Okazaki-shi, Aichi, Japan
    TEL: 0564-47-8981
    FAX: 0564-47-8982
    Founding April 18, 2025
    Establishment April 18, 2025
    Capital stock 5 million yen
    Registration Licensed by the Governor of Aichi Prefecture (General-7) No. 75835
    Correspondent Banks Nagoya Bank
    Okazaki Shinkin Bank
    Number of Employees 9 (employees and contract employees)
    Business
    • Sequence software design, software development
    • Design and manufacture of control and operation panels
    • Electrical work and general electrical work in explosion-proof zones
    Main Clients ARTON Co., Ltd. / Astec Co., Ltd. / Amano Machinery Industries Co., Ltd. / Shibaoka Works Co., Ltd. / Hakugetsu Industries Co., Ltd. / Shinmei Industries Co., Ltd. / Techno Co., Ltd. / Nabari Works Co., Ltd. / Nabari Holdings Co., Ltd. / Fujita Electric Industries Co., Ltd. / Hokuto Co., Ltd. / Meiji Electric Industries Co., Ltd. / Yasui Co., Ltd.
    Main Customers [Domestic]
    Aisin Co., Ltd. / Asmo Co., Ltd. / CKD Corporation / Suzuki Motor Corporation / Denso Corporation / Toyota Auto Body Co., Ltd. / Toyota Motor Corporation / Toyota Motor East Japan, Inc. / Toyota Industries Corporation / Nikke Machinery Works Co., Ltd. / NGK Spark Plug Co., Ltd. / Hamanako Denso Co., Ltd. / Brother Industries, Ltd.
    [Overseas]
    GTMC (GAC Toyota Motor Co., Ltd.) / TMMC (Toyota Motor Manufacturing Canada) / TMMGT (Toyota Motor Manufacturing de Guanajuato, Mexico) / TMMK (Toyota Motor Manufacturing Kentucky) / TMMT (Toyota Motor Manufacturing Turkey)

    ACCESS

    本社

    ZIP/Postal code 444-0241
    29 Kami-ike, Akashibu-cho, Okazaki-shi, Aichi, Japan
    TEL: 0564-64-3412 FAX: 0564-64-3866
    On Prefectural Road 293, turn west at the "Sarutai" traffic light at the Toyota Corolla Aipo store, and about 100 meters ahead, it will be on the right side.

    岡崎工場

    ZIP/Postal code 444-2135
    1-5-6 Daimon, Okazaki-shi, Aichi, Japan
    TEL: 0564-47-8981 FAX: 0564-47-8982
    On Prefectural Route 26, turn south at the "Daimon Ekimae" traffic light at the Circle K Daimon Ekimae store, and turn right at the first crossroads, about 200 meters down the road on the right.